Exporting glass-processing machinery since 2002, with international project support from planning to installation and training.
SANKEN Glass Straight Line Bevelling Machine
The SANKEN SKB Series Glass Straight Line Bevelling Machine is designed for processing and polishing straight bevelled edges on flat glass, mirrors and decorative glass.
The machine integrates bevel grinding and polishing in one processing sequence. Bevel angle, bevel width and glass thickness are selected according to the required processing specifications.
The series includes eight models: SKB-9, SKB-10, SKB-11, SKB-12 and their corresponding PLC variants.
All models support 3–12 mm glass, processing speeds of 0.7–3.5 m/min, bevel widths up to 40 mm and bevel angles from 0–25°.
Glass Straight Line Bevelling Machine
The SANKEN SKB Series Glass Straight Line Bevelling Machine is designed for grinding and polishing straight bevelled edges of flat glass. It is suitable for processing mirrors, bathroom glass, decorative glass, craft glass and other glass products requiring bevelled edge finishes.
Bevel grinding and polishing are integrated into one processing sequence. The equipment supports bevel angles from 0 to 25 degrees, a maximum bevel width of 40 mm and processing speeds adjustable from 0.7 to 3.5 m/min.
Eight models are available in the SKB Series, including SKB-9, SKB-10, SKB-11, SKB-12 and their corresponding PLC configurations. All models are designed for glass thicknesses from 3 to 12 mm.
SANKEN SKB Series Glass Straight Line Bevelling Machine
Glass Bevelling Functions
Straight Line Bevel Grinding
The machine grinds straight bevelled edges on flat glass sheets. The required bevel angle and width are set according to the glass-processing requirements.
Bevel Edge Polishing
The processed bevel surface passes through the configured grinding and polishing stages to produce the required finished edge.
Adjustable Bevel Angle
All eight SKB models have a catalogue-listed bevel angle range of 0–25 degrees, allowing different bevel angles to be selected within the specified range.
Bevel Width up to 40 mm
The maximum bevel width listed in the catalogue is 40 mm. The applicable bevel width for an individual workpiece should be confirmed according to glass thickness and bevel angle.
Adjustable Processing Speed
Processing speed can be adjusted within the specified range of 0.7–3.5 m/min according to the glass thickness, bevel dimensions and selected processing configuration.
Grinding and Polishing Wheel Arrangement
The SANKEN catalogue illustrates diamond grinding wheels, a bottom-edge diamond wheel, resin grinding wheels and polishing wheels in the SKB Series processing arrangement.
| Wheel Type | Processing Function |
|---|---|
| Diamond Grinding Wheels (D) | Initial grinding and bevel formation. |
| Bottom Edge Diamond Wheel (BED) | Grinding of the bottom glass edge. |
| Resin Grinding Wheels (R) | Fine grinding and refinement of the bevelled surface. |
| Polishing Wheels (P) | Final polishing of the processed bevel edge. |
The final grinding-wheel arrangement should be confirmed according to the selected SKB model and required bevel finish.
Working Sequence
The glass is conveyed through the configured grinding and polishing stations. The required bevel dimensions are determined by the selected angle, bevel width and glass thickness.
Machine Details
Equipment views and processing details of the SANKEN Glass Straight Line Bevelling Machine.
Technical Specifications
The SKB Series includes eight models, covering standard and PLC configurations. The following specifications are based on the SANKEN product catalogue.
| Model | Max. Processing Size | Min. Processing Size | Thickness | Speed | Max. Bevel Width | Bevel Angle | Power | Machine Size | Weight |
|---|---|---|---|---|---|---|---|---|---|
| SKB-9 | 1830 × 2440 mm | 50 × 50 mm | 3–12 mm | 0.7–3.5 m/min | 40 mm | 0–25° | 21 kW | 6600 × 1200 × 2500 mm | 3700 kg |
| SKB-10 | 1830 × 2440 mm | 50 × 50 mm | 3–12 mm | 0.7–3.5 m/min | 40 mm | 0–25° | 24 kW | 6800 × 1200 × 2500 mm | 4000 kg |
| SKB-11 | 1830 × 2440 mm | 50 × 50 mm | 3–12 mm | 0.7–3.5 m/min | 40 mm | 0–25° | 27 kW | 7000 × 1300 × 2500 mm | 4300 kg |
| SKB-12 | 1830 × 2440 mm | 50 × 50 mm | 3–12 mm | 0.7–3.5 m/min | 40 mm | 0–25° | 30 kW | 7200 × 1300 × 2500 mm | 4600 kg |
| SKB-9PLC | 1830 × 2440 mm | 50 × 50 mm | 3–12 mm | 0.7–3.5 m/min | 40 mm | 0–25° | 21 kW | 6600 × 1200 × 2500 mm | 3700 kg |
| SKB-10PLC | 1830 × 2440 mm | 50 × 50 mm | 3–12 mm | 0.7–3.5 m/min | 40 mm | 0–25° | 24 kW | 6800 × 1200 × 2500 mm | 4000 kg |
| SKB-11PLC | 1830 × 2440 mm | 50 × 50 mm | 3–12 mm | 0.7–3.5 m/min | 40 mm | 0–25° | 27 kW | 7000 × 1300 × 2500 mm | 4300 kg |
| SKB-12PLC | 1830 × 2440 mm | 50 × 50 mm | 3–12 mm | 0.7–3.5 m/min | 40 mm | 0–25° | 30 kW | 7200 × 1300 × 2500 mm | 4600 kg |
Specifications are based on the SANKEN product catalogue. Final equipment and grinding-wheel configurations should be confirmed according to the selected model and processing requirements.
Choosing the Right SKB Model
All eight models share the same published processing-size, glass-thickness, speed, bevel-width and bevel-angle ranges. Their main catalogue-listed differences are installed power, machine dimensions and weight.
SKB-9 / SKB-9PLC
Both models have a total power rating of 21 kW, machine dimensions of 6600 × 1200 × 2500 mm and a listed weight of 3700 kg.
SKB-10 / SKB-10PLC
These configurations have a total power rating of 24 kW, overall dimensions of 6800 × 1200 × 2500 mm and a weight of 4000 kg.
SKB-11 / SKB-11PLC
Both models have a total power rating of 27 kW, machine dimensions of 7000 × 1300 × 2500 mm and a listed weight of 4300 kg.
SKB-12 / SKB-12PLC
These configurations have a total power rating of 30 kW, machine dimensions of 7200 × 1300 × 2500 mm and a weight of 4600 kg.
Standard and PLC Models
The catalogue lists both standard and PLC versions of the SKB Series. The published mechanical dimensions and processing ranges are the same for each matching model pair.
The catalogue also recommends PLC touch-screen control for straightforward operation. Specific control-system options should be confirmed when selecting the machine.
Glass Bevelling vs. Straight Line Edging
A glass straight line bevelling machine is intended for forming and polishing a bevelled surface along the edge of flat glass. The SKB Series supports a maximum bevel width of 40 mm and bevel angles from 0 to 25 degrees.
For conventional straight flat-edge grinding and polishing, SANKEN also offers the SKE Series Glass Straight Line Edging Machine.
See the SANKEN Glass Straight Line Edging Machine for flat-edge processing configurations.
Applications
The SKB Series is designed for flat-glass products requiring straight bevelled edges and polishing.
Typical applications include mirror processing, bathroom glass, decorative glass, craft glass, art glass and glass products requiring a polished bevelled edge.
Machine configuration should be selected according to glass dimensions, thickness, required bevel angle, bevel width and edge-finishing requirements.
Frequently Asked Questions
What is a glass straight line bevelling machine?
A glass straight line bevelling machine grinds and polishes bevelled edges along straight glass sheets. The SANKEN SKB Series is designed for bevel processing on flat glass, mirrors and decorative glass.
Which SKB models are available?
The SANKEN catalogue lists SKB-9, SKB-10, SKB-11, SKB-12, SKB-9PLC, SKB-10PLC, SKB-11PLC and SKB-12PLC.
What is the maximum bevel width?
All eight models have a catalogue-listed maximum bevel width of 40 mm. The applicable width for a particular workpiece depends on its thickness and bevel angle.
What bevel angle can the machine process?
The specified bevel angle range is 0–25 degrees.
What glass thickness can the SKB Series process?
The catalogue specifies a glass thickness range of 3–12 mm for all eight SKB models.
What is the processing speed?
The processing speed is adjustable from 0.7 to 3.5 m/min across the eight catalogue models.
What is the difference between SKB-10 and SKB-10PLC?
The catalogue lists the same processing ranges, total power, dimensions and weight for both models. The catalogue recommends PLC touch-screen control, but specific control-system differences should be confirmed with SANKEN before ordering.
Can the SKB Series process 45-degree miter edges?
The catalogue specifies a bevel angle range of 0–25 degrees for the SKB Series. For 45-degree miter processing, a different machine configuration should be considered.
How should I choose the correct SKB model?
Model selection should consider glass dimensions, thickness, bevel width, bevel angle, required edge finish, control-system preferences and available installation space.
Equipment Selection and Technical Support
For SKB Series machine selection, please provide your glass dimensions, thickness range, required bevel width, bevel angle, edge-finishing requirements and factory layout.
SANKEN can review the appropriate SKB model and grinding-wheel configuration for your glass bevelling application.
SANKEN Glass Machinery is a Guangzhou-based manufacturer and international supplier of glass-processing machinery and complete production-line solutions.
Contact Us
Contact: Dalia Qiu
Tel: +86 15994813914
Landline: +86-20-82347228
Email: sales@sankenglass.com
WhatsApp: +86 15994813914
ADD: No.2, Xinghai Road, Lanhe, Nansha District, Guangzhou City, China. P.C 511480